3.2CL V6-3.2L SOHC (2003)
5. Select the proper 82 mm shim from the chart. Follow the example, and use the measurements you made in Step 3 and 4.
Basic Formula
(2) - (1) - (0.85 + 0.14) = shim thickness (maximum)
(2) - (1) - (0.85 + 0.21) = shim thickness (minimum)
-
Subtract distance (2) (step 4) to distance (1) (step 3).
-
0.85 mm (0.33 in): spring washer, a dimension in the installation.
-
0.14 mm (0.006 in): minimum thrust clearance
-
0.21 mm (0.008 in): maximum thrust clearance
For example
21.04 - 17.97 - (0.85 + 0.14) = 2.08 mm (0.082 in)
21.04 - 17.97 - (0.85 + 0.21) = 2.01 mm (0.079 in)
Take the middle value 2.04 mm (0.080 in) of the minimum value and the maximum value, and select the 0.93 mm (0.037 in) and 1.11 mm (0.044
in) shims.
NOTE:Enable to select the two sizes of 82 mm shim.
