3.2CL V6-3.2L SOHC (2003)
6. Install the 82 mm shim (A) selected the transmission housing (B).
7. Thoroughly clean the spring washer (A) before installing it on the clutch housing (B). Note the installation direction of the spring washer.
8. Install the mainshaft in the clutch housing.
9. Place the transmission housing over the mainshaft and onto the clutch housing.
10. Tighten the clutch and transmission housings with several 10 mm bolts.
NOTE:It is not necessary to use sealing agent between the housings.
11. Lightly tap on the mainshaft with a plastic hammer.