3.2CL V6-3.2L SOHC (2003)
12. Attach the special tool to the mainshaft as follows:
-
Back-out the mainshaft holder bolt (A) and loosen the two hex bolts (B).
-
Fit the holder over the mainshaft so its lip is towards the transmission.
-
Align the mainshaft holder's lip around the groove at the inside of the mainshaft splines.
13. Seat the mainshaft fully by tapping on its end with a plastic hammer.
14. Thread the mainshaft holder bolt in until it just contacts the wide surface of the mainshaft base.
