acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Other Service Bulletins for Remote Switch:|08 > < All Other Service Bulletins for Remote Switch:|Locations|Page 11714
Page 4
background image

7. Align the projections on the cable reel with the holes on the steering wheel, and install the steering wheel with a new steering wheel bolt (A).
8. Install the driver's airbag.
9. Reconnect the battery negative cable.

10. After installing the cable reel, confirm proper system operation:

-

Turn the ignition switch ON (II); the SRS indicator light should come on for about 6 seconds and then go off.

-

After the SRS indicator has turned off, turn the steering wheel fully left and right to confirm the SRS indicator does not come on.

-

Make sure both horn buttons work.

All Other Service Bulletins for Remote Switch:|08 > < All Other Service Bulletins for Remote Switch:|Locations|Page 11714