3.2TL TYPE S V6-3.2L SOHC (2002)
8. Remove the outer handle protector (A) from the outer handle (B) by releasing the hook (C).
9. Detach the harness clip (D) from the outer handle protector, then remove the outer handle protector and cylinder switch (E) from the door.
1O. Pull out the outer handle (A). Pry the outer handle rod (B) out of its joint (C) using diagonal cutters (D).
NOTE:
-
To ease reassembly, note the distance (E) of the outer handle rod on the joint before disconnecting it.
-
Take care not to bend the outer handle rod.
-
Use a shop towel (F) to protect the opening in the door.
11. Replace the bushing (G) on the outer handle.
12. Install the handle in the reverse order of removal, and note these items:
