3.2TL TYPE S V6-3.2L SOHC (2002)
6. Move the latch (A) until you can disconnect each rod, and disconnect the inner handle rod (B), lock rod (C) and connectors (D) from the latch.
Take care not to bend any of the rods.
7. Remove the latch (A) through the hole in the door.
8. Install the latch in the reverse order of removal, and note these items:
-
Make sure the connectors are plugged in properly, and each rod is connected securely.
-
Make sure the door locks and opens properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
