3.2TL TYPE S V6-3.2L SOHC (2002)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
1. Remove these items:
-
Front bulkhead cover, '99-01 models, '02-03 models.
-
Front bumper, '02-03 models.
-
Hood hinge cover, '02-03 models.
-
Inner fender, left side
-
Kick panel, left side
2. Disconnect the hood opener cable (A) from the hood latch (B), '99-01 models, '02-03 models, and hood release handle (C).
NOTE: '99-01 models are shown. '02-03 models are similar except the front bumper should be removed before replacing the hood opener cable.
3. Using a clip remover, detach the clips (D, E) from the body, then remove the hood opener cable from the vehicle. Take care not to bend the cable.
4. Install the cable in the reverse order of removal, and replace any damaged clips.
