3.2TL TYPE S V6-3.2L SOHC (2002)
cover.
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks and
clips.
-
'99 model: Make sure the seat heater connector is connected properly, and the seat heater harness is routed properly.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.
-
Use only original Acura replacement seat-back covers ('00-03 models).
-
'00-03 models: Reinitialize the OPDS control unit.
Seat Cushion Cover
1. Remove the front seat.
2. Remove the seat cushion, 4-way power seat on '99 model, 4-way power seat on '00-03 models, 8-way power seat on '99-01 models, 8-way power
seat on '02-03 models.
3. Remove the front cover from the seat cushion, 4-way power seat on '99 model, 4-way power seat on '00-03 models, 8-way power seat on '99-01
models, 8-way power seat on '02-03 models.
4. Release the clips (A) and hooks (B) from under the seat cushion, then loosen the seat cushion cover (C).