3.2TL TYPE S V6-3.2L SOHC (2002)
5. Release all the clips (A) and hook strips (B), and fold back the seat-back cover (C).
6. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B) and fastener (C) (3.2TL-S), then remove the seat-back
cover.
7. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks, clips,
and fasteners.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.