3.2TL TYPE S V6-3.2L SOHC (2002)
Brake Pad: Testing and Inspection
Rear
Rear Brake Pads Inspection and Replacement
1. Raise the rear of the vehicle, and make sure it is securely supported. Remove the rear wheel.
2. Release the parking brake.
3. Remove the brake hose from the suspension arm by removing the mounting bolt, then remove the two caliper bolts (A) and caliper (B) from the
bracket. Thoroughly clean the outside of the caliper to prevent dust and dirt from entering inside. Support the caliper with a piece of wire so that it
does not hang from the brake hose.
4. Remove the pad shims (A) and brake pads (B).
