3.2TL TYPE S V6-3.2L SOHC (2002)
Parking Brake Drum: Testing and Inspection
Parking Brake Shoes and Drum Inspection
1. Block the front wheels, then raise the rear of the vehicle, and make sure it is securely supported.
2. Release the parking brake, and remove the rear caliper and rear brake disc/drum.
3. Check the parking brake linings (A) for cracking, glazing, wear, and contamination.
4. Measure the parking brake lining thickness (B). Measurement does not include brake shoe thickness.
Parking Brake Lining Thickness:
Standard: 1.9 - 2.5 mm (0.075 - 0.098 inch)