3.2TL TYPE S V6-3.2L SOHC (2002)
6. Lower the parking brake shoe assembly, then separate the brake shoes by removing the lower return spring (A).
7. Remove the brake shoe adjuster assembly (B).
8. Remove the parking brake shoe by disconnecting the parking brake cable (A) from the parking brake lever (B).
9. Remove the U-clip (A), wave washer (B), pivot pin (C), and parking brake lever (D) from the parking brake shoe (E).
10. Apply Molykote 44 MA grease to the sliding surface of the pivot pin (A), and insert the pin into the parking brake shoe.
11. Install the parking brake lever (B) and wave washer (C) on the pivot pin, and secure them with a new U-clip (D).
^
Install the wave washer with its convex side facing out.
