3.2TL TYPE S V6-3.2L SOHC (2002)
^
Pinch the U-clip securely to prevent the pivot pin from coming out from the brake shoe.
12. Apply Molykote 44 MA grease to the shoe ends (A), sliding surface (B), and opposite edges of the parking brake shoe (C) as shown. Wipe off any
excess. Don't get grease on the brake linings.
13. Reconnect the parking brake cable (A) to the parking brake lever (B).
14. Clean the threaded portions of the clevis (A), and coat the threads of the clevis with grease. Clean the sliding surface of the clevis (B), and coat the
sliding surface of the clevis B with grease. Install the clevis A and B on the adjuster (C), and shorten the clevis A by turning the adjuster.
15. Reinstall the brake shoe adjuster assembly (D), and hook the lower return spring (E) on the parking brake shoes.
