3.2TL TYPE S V6-3.2L SOHC (2002)
Radiator Cooling Fan Motor: Diagnostic Trouble Code Tests and Associated Procedures
Radiator Fan Switch A Circuit
Radiator Fan Switch A Circuit Troubleshooting
1. Disconnect the radiator fan switch A 2P connector.
2. Turn the ignition switch ON (II).
3. Measure the voltage between the radiator fan switch A2P connector terminal No. 2 and body ground.
Is there battery voltage?
YES-Go to step 4.
NO-Repair open in the wire between the radiator fan switch A connector and under-hood fuse/relay box.
4. Turn the ignition switch OFF, and check for continuity between the radiator fan switch A 2P connector terminal No. 1 and body ground.
Is there continuity?
YES-Replace radiator fan switch A.
NO-Check for open in the wire between the radiator fan switch A connector and body ground. If the wire is OK, check for poor ground at
G101, G102.
