3.2TL TYPE S V6-3.2L SOHC (2002)
NOTE:
-
Identify parts as they are removed so they can be reinstalled in their original locations.
-
Inspect the rocker shafts and rocker arms.
-
Rocker arms must be installed in the same positions if reused.
-
When removing or installing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and rocker
arms on the shaft.
-
Bundle the rocker arms with rubber bands to keep them together as a set.
-
Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.
Rocker Arms and Shafts Inspection
Measure the intake rocker shaft and exhaust rocker shaft.
