3.2TL TYPE S V6-3.2L SOHC (2002)
1. Measure the diameter of the shaft at the first rocker location.
2. Zero the gauge (A) to the shaft diameter.
3. Measure the inside diameter of the rocker arm, and check it for an out-of-round condition.
4. Repeat for all rockers and both shafts. If the clearance is over the limit, replace the rocker shaft and all over tolerance rocker arms. If any intake
rocker arm needs replacement, replace all three rocker arms in that set (primary, mid, and secondary).
VTEC Rocker Arms
5. Inspect the rocker arm pistons (A). Push it manually. If it does not move smoothly, replace the rocker arm assembly.
