3.2TL TYPE S V6-3.2L SOHC (2002)
Compression Check: Testing and Inspection
Engine Compression Inspection
1. Warm up the engine to normal operating temperature (cooling fan comes on).
2. Turn the ignition switch OFF.
3. Remove the No. 1 (15A) fuse from the driver's under-dash fuse/relay box.
4. Start the engine and let it run until it stalls.
5. Remove the intake manifold cover (A) and ignition coil cover(s) (B).
6. Disconnect the Intake Manifold Runner Control (IMRC) actuator connector (A), then remove the IMRC actuator (B) (J32A2 engine).
