3.2TL TYPE S V6-3.2L SOHC (2002)
7. Remove the six ignition coils from the front and rear cylinder head.
8. Remove the six spark plugs.
9. Attach the compression gauge to a spark plug hole.
10. Connect a tachometer.
11. Open the throttle fully, then crank the engine with the starter motor and measure the compression.
Compression Pressure: Above 930 kPa (9.5 kgf/cm2, 135 psi) -200 rpm
12. Perform the same measurement on the remaining cylinders.
Maximum Variation: Within 200 kPa (2.0 kgf/cm2, 28 psi)
13. If the compression is not within specifications, check the following items, then remeasure the compression.
^
Damaged or worn valves and seats
^
Damaged cylinder head gasket
^
Damaged or worn piston rings
^
Damaged or worn piston and cylinder bore