3.2TL TYPE S V6-3.2L SOHC (2002)
9. Install the thrust washers (A) in the No. 3 journal. Oil the thrust washer surfaces.
10. Install the bearings (A) and bearing caps (B) with the arrow (C) facing the timing belt end of the engine.
11. Apply engine oil to the bolt threads and flange, then install the bearing cap bolts (D) and bearing cap side bolts (E).
12. Set the crankshaft to Bottom Dead Center (BDC) for the cylinder you are working on.
13. Remove the connecting rod caps. Install the ring compressor, and check that the bearing is securely in place.