3.2TL TYPE S V6-3.2L SOHC (2002)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley Removal and Installation
Special Tools Required
-
Holder Handle 07JAB-001020A
-
Holder Attachment, 50 mm, Offset 07MAB-PY3010A
-
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
Removal
1. Hold the pulley with the holder handle (A) and holder attachment(B).
2. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar.
Installation
1. Remove any oil from the pulleys (A), crankshaft (B), bolt (C) and washer (D). Clean and lubricate the joints.
2. Install the crankshaft pulley, and tighten the bolt to 245 Nm (25.0 kgf-m, 181 ft. lbs.). Do not use an impact wrench.