acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Seals and Gaskets, Engine > < Engine Mount Control Unit|Locations|Page 3393
Page 3
background image

11. Release the vacuum, then apply vacuum again.

Is There a noticeable change in idle smoothness with and without vacuum applied?

YES - Go to step 12.

NO - Replace the front engine mount and/or rear engine mount.

12. Disconnect the lower vacuum hose (A) from the engine mount control solenoid valve (B) and connect a vacuum pump/gauge to the hose.

Is There manifold vacuum at idle, and a decrease in manifold vacuum when you raise the engine speed above 1,000 rpm?

YES - Engine mount control system is OK at this time. Check the engine mounts if necessary.

NO - Replace the engine mount control solenoid valve.

Seals and Gaskets, Engine > < Engine Mount Control Unit|Locations|Page 3393