3.2TL TYPE S V6-3.2L SOHC (2002)
Condenser Fan Motor: Testing and Inspection
Condenser Fan High Speed Circuit Troubleshooting
Condenser Fan High Speed Circuit Troubleshooting
1. Check the No.3 (7.5 A) fuse in the driver's under-dash fuse/relay box.
Is the fuse OK?
YES - Go to step 2.
NO - Replace the fuse, and recheck.
2. Remove the fan control relay from the multi-relay box, and test it.
Is the relay OK?
YES - With the relay removed, go to step 3.
NO - Replace the fan control relay.
3. Turn the ignition switch ON (II).
4. Measure the voltage between the No.5 terminal of the fan control relay 5P socket and body ground.
Is there battery voltage?
YES - Go to step 5.
NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the fan control relay.
5. Turn the ignition switch OFF.
6. Check for continuity between the No.2 terminal of the fan control relay 5P socket and body ground.
Is there continuity?
YES - Repair open in the wire between the fan control relay and A/C diode B.
NO - Check for an open in the wire between the fan control relay and body ground. If the wire is OK, check for poor ground at G302.
