acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Condenser Fan High Speed Circuit Troubleshooting|Page 10109 > < Condenser Fan High Speed Circuit Troubleshooting
Page 1
background image

Condenser Fan Motor: Testing and Inspection
Radiator and Condenser Fans High Speed Circuit Troubleshooting

Radiator and Condenser Fans High Speed Circuit Troubleshooting

1. Remove A/C diode B from the right side of dash.

2. Check for current flow in both directions between the No.1 and No.2 terminals of A/C diode B.

Is there current flow in only one direction?

YES - With the diode removed, go to step 3.

NO - Replace A/C diode B.

3. Turn the ignition switch ON (II).

4. Measure the voltage between the No.2 terminal of A/C diode B 2P connector and body ground.

Is there battery voltage?

YES - Go to step 5.

NO - Repair open in the wire between the radiator fan relay and A/C diode B.

5. Turn the ignition switch OFF.
6. Reinstall A/C diode B.
7. Disconnect the A/C pressure switch 4P connector.
8. Turn the ignition switch ON (II).

Condenser Fan High Speed Circuit Troubleshooting|Page 10109 > < Condenser Fan High Speed Circuit Troubleshooting