3.2TL TYPE S V6-3.2L SOHC (2002)
9. Measure the voltage between the No.2 terminal of the A/C pressure switch 4P connector and body ground.
Is there battery voltage?
YES - Go to step 10.
NO - Repair open in the wire between A/C diode B and the A/C pressure switch.
10. Turn the ignition switch OFF.
11. Check for continuity between the No.1 and No.3 terminals of the A/C pressure switch 4P connector.
Is there continuity?
YES - Replace the A/C pressure switch.
NO - Repair open in the wire between the A/C pressure switch A and B.