3.2TL TYPE S V6-3.2L SOHC (2002)
8. Measure resistance between the IMRC actuator 2P connector terminals No.1 and No.2.
Is there 2 - 5 Ohm?
YES - Go to step 9.
NO - Replace the IMRC actuator.
9. Reconnect the IMRC actuator 2P connector.
10. Measure resistance between IMRC module 14P connector terminals No.3 and No.11.
Is there 2 - 5 Ohm?
YES - Go to step 13.
NO - Go to step 11.
11. Disconnect the IMRC actuator 2P connector.
12. Check for continuity between the IMRC module 14P connector terminal No.3 and No.11 and body ground individually.
Is there continuity?
YES - Repair short in the wire between the IMRC module and the IMRC actuator.
NO - Repair open in the wire between the IMRC module and the IMRC actuator.
