3.2TL TYPE S V6-3.2L SOHC (2002)
1. Write down the 13-digit serial number located on the right side of the new airbag inflator's box. For the warranty claim to be paid, your warranty
clerk must enter this 13-digit serial number in the Diagnostic Trouble Codes field on the warranty claim.
2. Remove the driver's airbag:
^
Refer to page 23-219 of the 1999-2003 3.2TL Service Manual, or
^
Refer to page 23-204 of the 2001-2003 3.20L Service Manual, or
^
Online, enter keywords DRIVER AIR, and select Driver's Airbag Replacement from the list.
3. Place the airbag, face down, on a clean shop towel.
4. Remove the four horn plate mounting bolts, the mounting bolt felt washers, and the horn plate. The felt washers will not be reused.
5. Remove and discard the felt tape covering the lower two inflator locknuts.
