3.2TL TYPE S V6-3.2L SOHC (2002)
14. Connect a voltmeter between the No. 3 terminal of SRS unit connector A (18P) and body ground.
15. Turn the ignition switch ON (II), and measure voltage.
Is there battery voltage?
YES - Poor contact at the SRS main harness 18P connector or faulty SRS unit; check the connector. If the connector is OK, replace the SRS unit.
NO - Poor contact at the SRS main harness 2P connector or open in the SRS main harness; check the connector. If the connector is OK, replace
the SRS main harness.