3.2TL TYPE S V6-3.2L SOHC (2002)
26. Coat the new O-ring (A) with power steering fluid, and position it in the bottom of the pump housing (B).
27. Install the pump cover assembly (C) in the pump housing.
28. Coat the flow control valve (A) with power steering fluid, then install it and the spring (B) in the pump housing.
29. Coat the new O-ring (C) with power steering fluid, and install it on the flow control valve cap (D), then install the cap on the pump housing, and
tighten it.
30. Coat the new O-ring (A) with power steering fluid, and install it on the inlet joint (B). Install the inlet joint on the pump housing, and tighten the
flange bolt.
