3.2TL TYPE S V6-3.2L SOHC (2002)
Steering Gear: Service and Repair
Removal and Installation
Installation
1. Before installing the gearbox, slide the rack all the way to right.
2. Pass the passenger's side of the steering gearbox (A) above and through the passenger's side of the rear beam. Be careful not to bend or damage the
power steering lines and cylinder lines when installing the gearbox.
3. Raise the driver's side of the steering gearbox above and through the driver's side of the rear beam. Then insert the pinion shaft (B) up through the
bulkhead.
4. Install the pinion shaft grommet (A). Align the slot (B) in the pinion shaft grommet with the lug portion on the valve housing.
