3.2TL TYPE S V6-3.2L SOHC (2002)
6. Remove the spring (C) and the rack guide (D) from the gearbox.
7. Remove the cylinder lines from the gearbox.
8. Drain the fluid from the cylinder fittings by slowly moving the steering rack back and forth.
9. Remove the 2 flange bolts, then remove the valve body unit (A) from the gearbox (B).
10. Drill a 3 mm (0.12 inch) diameter hole approximately 2.5 - 3.0 mm (0.10 - 0.12 inch) in depth in the staked point (A) on the cylinder. Do not
