3.2TL TYPE S V6-3.2L SOHC (2002)
Control Arm: Service and Repair
Leading Arm
Replacement
1. Raise the rear of the vehicle, and make sure it is securely supported. Remove the rear wheel.
2. Remove the leading arm mounting bolts (A), and remove the leading arm (B) from the vehicle.
3. Install the leading arm in the reverse order of removal, and note these items:
-
Tighten all mounting hardware to the specified torque values.
-
Before installing the wheel, clean the mating surfaces on the brake disc and the inside of the wheel. Check the rear wheel alignment, and adjust
it if necessary.
