3.2TL TYPE S V6-3.2L SOHC (2002)
2. Assemble the damper in reverse order of disassembly, except for the washer and self-locking nut. Align the bottom of damper spring and spring
lower seat (B).
3. Position the damper mounting base on the damper unit.
4. Compress the damper spring with the spring compressor.
5. Install the washer (A), and loosely install a new self-locking nut (B1).
6. Hold the damper shaft with a hex wrench, and tighten the self-locking nut.
Installation