3.2TL TYPE S V6-3.2L SOHC (2002)
1. Lower the rear suspension, and position the damper (A), and loosely install the 2 flange nuts (B).
2. Loosely install the flange bolt (A) and nut (B).
3. Raise the rear suspension with a floor jack until the vehicle just lifts off the safety stand.
4. Tighten the flange bolt at the bottom of the damper to the specified torque.
5. Tighten the flange nut of the stabilizer link ball joint to the specified torque while holding the joint pin with a hex wrench.
6. Tighten the 2 flange nuts on top of the damper to the specified torque.
7. Install the rear shelf.
8. Install the rear wheels.
9. Check the rear wheel alignment and adjust it if necessary.
