3.2TL TYPE S V6-3.2L SOHC (2002)
1. Wrap the splines with vinyl tape (A) to prevent damage to the inboard boot and dynamic damper.
2. Install the dynamic damper and inboard boot on the driveshaft, then remove the vinyl tape. Take care not to damage the inboard boot and dynamic
damper.
3. Install the spider (A) on the driveshaft by aligning the marks (B) on the spider and end of the driveshaft.
4. Fit the circlip (C) into the driveshaft groove. Always rotate the circlip in its groove to be sure it is fully seated.
5. Fit the rollers (A or B) onto the spider (C) with their high shoulders facing outward, and note these items;
-
Reinstall the rollers in their original positions on the spider by aligning the marks (C).
-
Hold the driveshaft pointed up to prevent the rollers from falling off.
-
The roller (A) is for '01 model, roller (B) is for '99 - 00 models.