3.2TL TYPE S V6-3.2L SOHC (2002)
6. Pack the inboard joint with the joint grease included in the new driveshaft set.
Grease quantity
Inboard joint: 120 - 130 grams (4.2 - 4.6 ounces)
7. Fit the inboard joint (A) onto the driveshaft, and note these items:
-
Reinstall the inboard joint (A) onto the driveshaft by aligning the marks (B) on the inboard joint and the rollers.
-
Hold the driveshaft with the inboard joint pointing up to prevent it from falling off.
-
For'99 - 00 models, align the roller holders (C) with the grooves in the inboard joint.
8. Adjust the length of the driveshafts to the figure, then adjust the boots to halfway between full compression and full extension. Make sure the ends
of the boots seat in the groove of the driveshaft and joint.
'99 model:
Left Driveshaft: 542 - 547 mm (21.3 - 21.5 inches)
Right Driveshaft: 532 - 537 mm (20.9 - 21.1 inches)
'00 - 01 models
Left Driveshaft: 554 - 559 mm (21.8 - 22.0 inches)
Right Driveshaft: 544 - 549 mm (21.4 - 21.6 inches)
