3.2TL TYPE S V6-3.2L SOHC (2002)
Windshield: Service and Repair
Windshield Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Use seat covers to avoid damaging any surfaces.
-
Wear eye protection when removing the glass with piano wire.
1. Remove the windshield wiper arms and cowl cover.
2. Remove the molding (A) from the edge of the windshield (B). If necessary, cut the molding with a utility knife.
3. Pull down the front portion of the headliner. Take care not to bend the headliner excessively, as you may crease or break it.
4. Apply protective tape (A) along the edge of the dashboard (B) and body as shown. Using an awl, make a hole through the rubber dam (C),
adhesive (D), and dashboard seal (E) from inside the vehicle. Push a piece of piano wire (F) through the hole, and wrap each end around a piece of
wood.