3.5RL V6-3474cc 3.5L (2001)
Lower Side Moulding / Trim: Service and Repair
Door and Side Moldings
Removal - '99 - 04 Models
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
NOTE:
-
To remove the front side molding, remove the inner fender.
-
To remove the door molding, remove the door panel and plastic cover.
-
To remove the rear side molding, insert a flat-tip screwdriver between the body and molding, then detach the clip.
-
Take care not to bend the door moldings.
If the old molding is to be reinstalled:
The following materials and tools are required to repair the molding.
NOTE: Follow the manufacturer's instructions.
Materials: (Reference)
-
Stripe remover
3M 08907
-
Stripe adhesive remover
3M 08908
-
Adhesive tape