3.5RL V6-3474cc 3.5L (2001)
Front Strut / Shock Tower: Service and Repair
Replacement
Replacement
1. Remove the related parts.
-
Parts that must be removed when removing the front bulkhead
-
Parts on passenger side of lower dashboard which are especially flammable.
-
Electrical accessories in engine the compartment and the wire harnesses.
2. Pull out and straighten the damaged area to approximately the original shape.
-
Attach the vehicle to the frame straightener by tightening the underbody clamps at the horizontal pinch weld points.
-
Before cutting off the damaged sections, pull them out so that they are restored to the original shape.
-
Do not pull out more than necessary.
-
Pull out and straighten the damaged area of the lower dashboard, front pillar, and other parts.
-
After pulling, check the damper housing position using the body dimensional drawings and positioning jig.