3.5RL V6-3474cc 3.5L (2001)
NOTE: Check the condition of the door and hinges.
3. Peel off the undercoat.
Heat the undercoat at the weld areas of the wheelhouse and front side frame with a gas torch, and peel off the undercoat with a metal spatula.
4. Cut and pry off the front wheelhouse and damper housing.
-1 When replacing the front wheelhouse only.
-
Remove the wheelhouse upper panel.
-
Remove the MIG weld flange with a disc sander.
WARNING: To prevent eye injury, wear goggles or safety glasses whenever sanding, cutting or grinding.