3.5RL V6-3474cc 3.5L (2001)
end seal will remain in the gearbox housing.
22. Check the rubber stop for damage or deterioration; if OK, go on step 23; if not, replace the rubber stop:
Remove the rubber stop by prying it out of the gearbox housing with a flat tip screwdriver.
CAUTION: Protect the pry point on the gearbox housing with shop towel.
23. Carefully pry the piston seal ring and O-ring off the rack piston.
CAUTION: Be careful not to damage the inside of seal ring groove and piston edges when removing the seal ring.
Valve Body Unit Disassembly
Valve body unit: