3.5RL V6-3474cc 3.5L (2001)
61. Grease the sliding surface of the rack guide, and install it onto the gearbox housing.
62. For '96 - 98 models: Apply a thin coat of grease to the new O-ring, and install it on the rack guide screw.
For'99 - 01 models: Apply sealant to the all around threads on the rack guide screw.
63. Install the spring, rack guide screw and locknut on the gearbox housing.
64. Adjust the rack guide screw.
NOTE: After adjusting, check that the rack moves smoothly by sliding the rack right and left.
65. Install the new lock washer in the groove in the steering rack.
66. Install the steering rack ends into the rack.
67. Hold the steering rack with a wrench ('99 - 01 models: left end only), and tighten the rack ends with another wrench.
NOTE: '96 - 98 models shown.
CAUTION: Be careful not to damage the rack surface with the wrench.
