CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Grease Caliper Pin & Boot
2. Apply rubber grease to the sliding surface of the pins and inside of the new pin boots.
3. Install the pin boots into the groove in the caliper bracket properly.
4. Insert the pin A and pin B into the caliper bracket.
5. Install the pin boots into the groove in the pins properly.
6. Install the brake pad retainers and brake pads.
7. Align the cutout in the piston with the tab on the inner pad.
8. Install the caliper on the caliper bracket, and tighten the caliper mounting bolts.
9. Connect the brake hose to the caliper with new sealing washers, and tighten the banjo bolt.
Specs
- Caliper Bracket Mounting Bolts 38 Nm (28 lb.ft.)
- Banjo Bolts 34 Nm (25 lb.ft.)
- Caliper Mounting Bolts 25 Nm (18 lb.ft.)
Brake Cable Removal & Installation
10. Insert the cable through the arm, and connect the cable to the lever with the clevis pin and lock pin. Install the cable clip securely.
