CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
- Using vernier calipers, measure the thickness of each brake pad lining.
Specs
Standard 7.5 - 8.5 mm (0.30 - 0.33 in)
Service Limit 1.6 mm (0.06 in)
Caliper Bolts 25 Nm (2.5kg m, 18lb ft)
- Remove the pad retainers.
- Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
- Check the brake disc for damage and cracks.
INSTALLATION
Installing Shims
- Make sure that the pad retainers are installed in the correct positions.
- Apply Molykote M77 grease to the pad side of the shim. Wipe excess grease off the shim.
WARNING:
-
When reusing the pads, always reinstall the brake pads in their original positions to prevent loss of braking efficiency.
-
Contaminated brake discs or pads reduce stopping ability. Keep grease off the discs and pads.
NOTE: Install the inner pad with its wear indicator facing downward.