CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Installing Pads And Shims
- Install the brake pads and pad shims on the caliper bracket.
- Rotate the caliper piston clockwise into the cylinder, then align the cutout in the piston with the tab on the inner pad by turning the piston back.
CAUTION: Lubricate the boot with rubber grease to avoid twisting the piston boot. If the piston boot is twisted, back it out so it sits properly.
- Install the brake caliper
Caliper Installation
- Install and tighten the caliper bolts while holding the caliper pins with a thin, open-end wrench.
- After installation, check for leaks at hose and line joints and connections, and retighten if necessary.
- Depress the brake pedal several times to make sure the brakes work, then road-test.
NOTE: Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
