CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Rear Disc Micrometer Setup
-
Using a micrometer, measure disc thickness at eight points, approximately 45° apart and 10 mm (0.4 in) in from the outer edge of the disc.
Specs:
Brake disc thickness 9.9-10.1 mm (0.39-0.40 in)
Max refinishing limit 8.0 mm (0.31 in)
Brake Disc Parallelism 0.015mm (0.31 in) max.
NOTE: Replace the brake disc if the smallest measurement is less than the max. refinishing limit. This is the maximum allowable difference
between the thickness measurements.
-
If the disc is beyond the service limit for parallelism, refinish the brake disc.
NOTE: Refer to Steering and Suspension for brake disc replacement.
