CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
23. Pull the knuckle outward and remove the driveshaft outboard joint from the knuckle by tapping the driveshaft end using a plastic hammer, then
remove the knuckle.
24. Install components in reverse order of removal procedures.
TOOL REQUIRED
-
07GAF-SE00100 Hub Dis/Assembly Tool
-
07GAF-SD40700 Hub Dis/Assembly Base
-
07749-0010000 Driver
-
07746-0010400 52 x 55 mm Attachment
REPLACEMENT
1. Remove steering knuckle. See: Steering and Suspension/Steering/Front Steering Knuckle/Service and Repair
2. Remove the knuckle from the hub unit.