CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
17. Align the rear balancer shaft pulley by using a 6 x 100 mm bolt or equivalent as an tool. Scribe a line 74 mm (2.9 in.) from the end of the bolt.
Insert the bolt into the maintenance hole to the scribed line.
18. Align the groove on the front balancer shaft pulley with the pointer on the oil pump housing as shown.
19. Install the balancer belt. Loosen the adjusting nut 2/3-1 turn to tension the balancer belt.
20. Remove the 6 x 100 mm bolt from the rear balancer shaft, then install the 12 mm sealing bolt.
21. Install the crankshaft pulley, then tighten the pulley bolt.
