CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Brush Holder: Testing and Inspection
Starting System-Starter Brush Holder Test-M/T
Manual Transmission
Starting System-Starter Brush Holder Test-A/T
Automatic Transmission
1. Check that there is no continuity between the (+) and (-) brush holders.
If there is continuity, replace the brush holder assembly.
Starting System-Starter Brush Holder Test
2. Insert the brush into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale to the spring. Measure the
spring tension at the moment the spring lifts off the brush.
Spring Tension: