CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
2. Install the new oil seal in the pump housing by hand, then install the pump seal spacer.
NOTE: Insert the oil seal with its grooved side facing in.
3. Install the pump drive shaft assembly with the special tool.
4. Install the 38 mm circlip with its tapered side facing out.
5. Coat the side plate grooves with the recommended power steering fluid, then position the 16.8 x 1.9 mm and 54 x 1.9 mm O-rings on the side
plate.
6. Install the preload spring in the pump housing.
7. Set the 4.5 x 49.8 mm roller in the 4.5 mm hole in the pump housing.