CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
14. Install the 68.5 x 1.9 mm O-ring on the numb cover.
15. Align the roller set holes in the pump cover with the rollers.
16. Align the projection on the pump housing and the projection on the pump cover, and tighten the four bolts.
17. Set the 13 x 1.9 mm O-ring on the inlet joint.
18. Install the inlet joint on the pump housing.
19. Align the pin of sub valve with the oil passage in pump housing, and push down the sub valve. Fix the sub valve with the snap ring.
20. Rotate the pump drive shaft manually, and make sure the pump drive shaft rotates smoothly.
